Hardware Installation - A4Tech G6-10 User Manual

Hardware Installation

Step 1: Inserting the Batteries
A. Press the tab on the battery cover
locates on the mouse as shown here
and removes the cover.
Step 2: Connect the Receiver
For Notebook computer:
A. Insert the USB receiver into the USB port of your Notebook computer.
For PC computer:
A. Insert the USB receiver into the USB port on desktop computer or Via USB HUB.
B. The USB receiver will automatically be recognized by your computer.
B. Insert the supplied batteries, making sure that the
positive (+) and negative (-) ends of the battery match
the polarity indicators inside the battery housing.
C. Slide the batter cover back into its
position until it "clicks" firmly into place.
- 2 -