Page 1
S T E R E O D E L U 20 0 OWNER’S MANUAL PRODUCT DESCRIPTION – The Shenandoah Stereo Delux 200 is a 2 channel – 4 input, 200 watt true stereo acoustic instrument amplifier with 2 separate Alesis™ digital effects engines, full stereo DSP algorithms and 2 x 10”...
Page 2
INPUTS – The Shenandoah™ 200 is equipped with 2 types of input jacks. The ¼” input is unbalanced and “line/instrument level” with a useable sensitivity from 50 mV to 1 volt. The input impedance is 150 k ohms. The ¼” input will also accept most active balanced line sources, automatically unbalancing them by recognizing the tip portion of the balanced signal.
Page 3
controls Effects Return B. The effects signal is muted when the switch is open. LED’s show when the effects are active.
Page 4
ACTIVE 4 BAND EQUALIZATION – band (with 2 sweepable mids) active equalizer. These equalizers, similar to those found on professional sound consoles, are very useful tools when used correctly. LOW FREQUENCY EQ - The corner frequency of the low frequency section is 85 Hz, with a shelving curve type.
Page 5
DIRECT OUTPUTS – The Shenandoah™ 200 contains the most comprehensive direct output section available on any acoustic instrument amplifier. The XLR balanced and ¼” unbalanced outputs make “real world sense” when connecting with other equipment. The ¼” unbalanced outputs are true professional line level (+4 dbv) with an output impedance of 1k ohm, and can drive virtually any line level input, including power amplifiers.
In addition, by use of this device, the user agrees to hold Genz Benz Enclosures, Inc. and its designers, sales agents and all other affiliates and related parties harmless in the event of any accident, injury, damage or loss resulting from such use.