Philips 50PUN6204/61 User Manual page 13

Smart Picture
Apply a predefined picture setting options by
using the Smart Picture.
1
Press SETUP, and select [Picture] >
[Smart Picture].
2
Select one of the following settings, and
then press OK:
•
[Vivid]: Application of dynamic and
colorful settings, which is suitable for
daytime watching.
•
[Standard]: Adjust the picture
settings to suit most types of video
environments and types.
•
[ECO]: Application of the low power
settings.
•
[Movie]: Application of movie-
watching settings.
•
[Personal]: Use of custom picture
settings.
Adjust the picture settings
manually
1
SETUP, select [Picture], and then
Press
press OK.
2
Select one of the following settings, and
then press OK:
•
[Backlight]: Adjust the backlight
intensity.
•
[Brightness]: Adjust the intensity and
finesse of dark areas.
•
[Video Contrast]: Adjust the contrast,
to increase the intensity difference
between highlight and dark.
•
[Color]: Adjust the color saturation.
•
[Tint]: The definition of tint
temperature.
•
[Sharpness]: Adjust the sharpness of
the image.
•
[Aspect Ratio]: Change the picture
format.
•
[Overscan]: Set the Overscan to Off
to improve HDMI video quality. The
default setting is On.
•
[Color Temperature]: Set the picture
to a preset color temperature for a
better white balance.
•
[Noise Reduction]: Filter and reduce
the noises in an image.
•
[Dynamic Contrast]: Set the level at
which the TV automatically enhances
the details in the dark, middle and
light areas of the picture.
•
[Reset Picture Settings]: Restore
the picture settings to their default
values.
Change the picture format
1
Press SETUP, select [Picture] > [Aspect
Ratio], and then press
Picture format summary
You can configure the following picture
settings.
Note
•
Depending on the format of picture
sources, some picture settings are not
available.
[Normal]:
Display of the traditional 4:3
picture format.
[Zoom]:
Adjust the picture format
from 4:3 to 14:9.
[Wide]:
Adjust the picture format
from 4:3 to 16:9.
[1 : 1]:
Detects the resolution of
the signal and displays the
picture with the same number
of pixels on the screen.
[Auto]:
Adjust the picture to fill the
screen (subtitles remain
visible).
.
EN-GB 11