Table of Contents
Advertisement
User Controls
68
English
Quick Start-Guide for "RS232 by Telnet"
Check and get the IP address on OSD of the projector.
`
Make sure that the PC/laptop can access the web-page of the
`
projector.
Make sure that "Windows FIrewall" setting is set disabled in
`
case of "TELNET" function filtering out by PC/laptop.
1. Start > All Programs.> Accessories > Command Prompt.
2. Input the command format as follows:
telnet ttt.xxx.yyy.zzz 23 ("Enter" key pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
3. If Telnet-Connection ready, and user can have RS232
command input, then "Enter" key pressed, the RS232
command will be workable.
Advertisement
Table of Contents
