Detaching The Stand Base; Detaching The Stand Body; Using The Cable Holder - LG 22CNV23K Owner's Manual

8
ASSEMBLING AND PREPARING

Detaching the stand base

1
Place the monitor's screen face down.
To protect the screen from scratches, cover the
surface with a soft cloth.
2
Using a coin, turn the screw in the stand base
counterclockwise. Detach the stand base from
the stand body.
Stand Base
CAUTION
The components appearing in the illustra-
y
tions may look different from the actual prod-
uct.
Do not carry the monitor upside-down as this
y
may cause it to fall off its stand, resulting in
damage or injury.
To avoid damaging the screen when lifting
y
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.
Only remove the tape and the locking pin
y
when the monitor is mounted on the stand
base and is in an upright position. Otherwise,
the stand body may protrude, which may
lead to injury.

Detaching the stand body

1
Place the monitor's screen face down. To
protect the screen from scratches, cover the
surface with a soft cloth.
2
Using a screwdriver, remove the four screws
and detach the stand from the monitor.
Stand Body

Using the cable holder

Fix the Knob (Cable holder) to the
1
Hole(Hingebody).
Use one screw to fix the Cable Holder and
2
monitor set.
Close the Cable holder.
3
NOTE
The holes are used for wall mount bracket.
y
Varies depending upon your country or
y
model.