Table of Contents
Advertisement
20. Connecting the Primebook to a television
You can transfer the image and sound from the Primebook to a suitable
television via HDMI cable or Miracast.
Connecting to a television via HDMI cable
To connect the Primebook to a suitable television via HDMI, you require an
appropriate cable (Micro-HDMI to HDMI, available in specialist shops).
Connect the Primebook to the TV using the HDMI cable, and select the correct
HDMI input as the source (the HDMI input to which the cable is connected). The
television now shows the display of your Primebook.
Connecting to a television via Miracast
The Miracast technology is a peer-to-peer standard for image transfer. The
Primebook supports this standard and enables wireless transfer of image and
sound from the Primebook to a WiFi- and Miracast-enabled television device.
ADVICE
i
The Primebook can connect to your television via Miracast only if the
television also supports Miracast technology. Please check with your television
manufacturer if necessary.
Proceed as follows to connect your Primebook to a Miracast-enabled television:
a)
First, take all of the necessary steps to prepare your Miracast-enabled
television for the Miracast transfer (see your television's operating
instructions for details).
b)
Call up the settings (see Section 13).
c)
In Settings, tap "Devices" and in the following window tap "Bluetooth &
other devices" on the left.
d)
Now tap "Add Bluetooth or other device" in the top and than
"Wireless display or dock". The Primebook searches for available
devices. This process may take a moment. All available devices are then
displayed in a pop-up window.
e)
Tap the device that you wish to connect to. The two devices now connect
to each other.
f)
A short time later, the selected device will show the display of the Primebook.
28
Advertisement
Table of Contents
