J. REMOVING THE TURNTABLE MOTOR
(1) Remove the glass tray and rotating ring.
(2) Remove the turntable shaft VERY CAREFULLY
with one hand. (Figure 18)
(3) Remove the base plate by removing the 8
screwssecuring it to the oven cavity. (Figure 19)
(4) Disconnect the lead wire from the turntable
motorterminals.
(5) Remove the 1 screw securing the turntable
motorto the oven cavity assembly. (Figure 20)
NOTES:
• Remove the lead wire from the turntable motor
VERY CAREFULLY.
• Be sure to grasp the connector, not the wires, when
removing.
Figure 18
Figure 19
Figure 20
-39-