Multi-Function Meter Unit - Yamaha TRACER 700 2020 Service Manual

EAS20008
FEATURES
EAS30982

MULTI-FUNCTION METER UNIT

2
1
7 6
1. Eco indicator "ECO"
2. Speedometer
3. Tachometer
4. Transmission gear display
5. Clock
6. Fuel meter
7. Multi-function display
The multi-function meter unit is equipped with
the following:
• speedometer
• tachometer
• fuel meter
• clock
• eco indicator
• transmission gear display
• multi-function display
EWA12423
WARNING
Be sure to stop the vehicle before making
any setting changes to the multi-function
meter unit. Changing settings while riding
can distract the operator and increase the
risk of an accident.
The "TRIP/INFO" switch is located on the left
side of the handlebar. This switch allows you to
control or change the settings of the multi-func-
tion meter unit. To use the "TRIP" switch, move
the "TRIP/INFO" switch in direction "a". To use
the "INFO" switch, move the "TRIP/INFO" switch
in direction "b".
3
5 4
1-2
1. "TRIP/INFO" switch
TIP
• To switch between kilometers and miles, set
the multi-function display to the odometer, and
then turn the key to "OFF". Push and hold the
"TRIP" switch and then turn the key to "ON".
Continue pushing until the "TRIP" switch dis-
play units change.
• The display units will return to factory settings
in case of battery disconnection.
EWA12423
WARNING
Be sure to stop the vehicle before making
any setting changes to the multi-function
meter unit. Changing settings while riding
can distract the operator and increase the
risk of an accident.
Speedometer
The speedometer shows the vehicle's traveling
speed.
Tachometer
1
1. Tachometer
2. Tachometer red zone
The tachometer shows the engine speed.
ECA19660
NOTICE
Do not operate the engine in the tachometer
red zone.
FEATURES
1
2