NEC PE455UL User Manual page 29

Terminal Panel Features
9
1. HDMI 1 IN Terminal (Type A)
(→ page 84, 85, 87)
2. HDMI 2 IN Terminal (Type A)
(→ page 84, 85, 87)
3. COMPUTER IN/ Component Input
Terminal (Mini D-Sub 15 Pin)
(→ page 84, 86)
4. AUDIO IN Mini Jack (Stereo Mini)
(→ page 84, 86)
5. AUDIO OUT Mini Jack (Stereo Mini)
Audio signal of the image projected from the
projector is output.
When audio equipment is connected, the
projector speaker is disabled.
6. LAN Port (RJ-45)
(→ page 88)
1. Check the product overview, supplied items and part names
7 3
9
1 2 6
7. USB Port (Type A)
Connect the USB memory. When picture data
is saved in a USB memory, the picture can be
projected with the [VIEWER] of the projector.
(→ page 95)
In addition, a 5 V/2.0 A power supply can be
supplied for expansion use.
8. PC CONTROL Port (D-Sub 9 Pin)
Use this port to connect a PC or control
system. This enables you to control the pro-
jector using serial communication protocol.
If you are writing your own program, typical
PC control codes are on page 139.
9. Wireless LAN cover ( )
There are two terminals behind the cover.
• USB (Wireless LAN) Port
(→ page 90)
• SERVICE Port (USB Type B)
(for service purpose only)
4 5 8