TP-Link RE205 User Manual page 40

Chapter 6
Wireless devices that support WPS, including Android phones, tablets, and most USB
network cards, can be connected to your extender through this method (not supported
by iOS devices).
1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set
for the extender.
2. Go to Settings > Wireless
3. Enable WPS.
4. Connect via WPS:
• AP's PIN: Enable
Generate to get a new PIN or click
• Push Button (Recommended): Click
client device.
• PIN code: Enter the client's PIN, and click Connect.
> WPS.
AP's PIN and enter the PIN on your device. You can click
Default
Connect
More Features of Your Extender
to restore the PIN to its factory one.
and push the WPS button on the
37