Panasonic PT-VW340 Series Operating Instructions (Functional Manual) page 99

[Advanced control] page
Click [Projector control] → [Advanced control].
1 [POSITION]
Adjusts the position of image and the keystone
correction.
[Network config] page
Click [Detailed set up] → [Network config].
fClick [Network config] to display the [CAUTION!] screen.
fThe current settings are displayed by pressing the [Next] button.
fClick [Change] to display the setting change screen.
Wired LAN
1 [DHCP ON]/[DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
2 [IP ADDRESS]
Enter the IP address when not using a DHCP server.
3 [SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
4 [DEFAULT GATEWAY]
Enter the default gateway address when not using a
DHCP server.
Note
f When you use the "Forward" and "Back" functions of your browser, a warning message "Page has Expired" may appear. In
that case, click [Network config] again since the following operation will not be guaranteed.
f Changing LAN settings while connected to the LAN may cause the connection to cut out.
Chapter 4 Settings - [NETWORK/USB] menu
2 [PICTURE]
Adjusts the items of image.
5 [DNS1]/[DNS2]
Enter the DNS1/DNS2 server address.
Permissible/ available characters for the entry of DNS1/
DNS2 server address.
(primary):
Numbers (0 - 9), period (.)
(Example: 192.168.0.253).
6 [Back]/[Next]
Click the [Back] button to return to the original screen.
The current settings are displayed by pressing the [Next]
button.
Click the [Submit] button to update the settings.
1
2
1
2
3
4
5
6
ENGLISH - 99