NEC NP-PA703UL User Manual page 143

ALERT MAIL
ALERT MAIL
HOST NAME
DOMAIN NAME
SENDER'S AD-
DRESS
SMTP SERVER
NAME
RECIPIENT'S AD-
DRESS 1, 2, 3
TEST MAIL
This option will notify your computer of error messages via e-mail
when using wireless or wired LAN.
Placing a checkmark will turn on the Alert Mail feature�
Clearing a checkmark will turn off the Alert Mail feature�
Sample of a message to be sent from the projector:
Subject: [Projector] Projector Information
THE COOLING FAN HAS STOPPED.
[INFORMATION]
PROJECTOR NAME: xxxxx
LIGHT HOURS USED: xxxx[H]
Type in a host name.
Type in a domain name of the network connected to the projector. Up to 60 alphanumeric
Specify the sender's address.
Type in the SMTP server name to be connected to the projector. Up to 60 alphanumeric
Type in your recipient's address.
Send a test mail to check if your settings are correct.
NOTE:
• If you entered an incorrect address in a test, you may not receive an
Alert mail. Should this happen, check if the Recipient's Address is
correctly set.
• Unless any one of the [SENDER'S ADDRESS], [SMTP SERVER'S
NAME] or [RECIPIENT'S ADDRESS 1-3] is selected, [TEST MAIL] is
not available.
• Be sure to highlight [OK] and press the ENTER button before executing
[TEST MAIL].
126
5. Using On-Screen Menu
—
Up to 16 alphanumeric
characters
characters
Up to 60 alphanu-
meric characters and
symbols
characters
Up to 60 alphanu-
meric characters and
symbols
—