Table of Contents
Advertisement
[Speaker Setup]
Optimize the surround output for the connected
speakers.
[CD Upsampling]
For better sound quality in stereo mode, convert
the music CD to a higher sampling rate.
•
[Off] - Turn off CD-upsampling.
•
[88.2kHz] - Convert to twice the original
sampling rate.
•
[176.4kHz] - Convert to four times the original
sampling rate.
[Night Mode]
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
•
[On] - Enjoy quiet viewing at night.
•
[Off] - Enjoy surround sound with a full
dynamic range.
Note
•
Applicable only to Dolby Digital encoded DVDs.
Video setup
1
Press SETUP.
» [General Setup] menu is displayed.
2
Press
to select [Video Setup], and then
press
to enter the submenu.
3
Select an option, and then press OK.
4
Select a setting, and then press OK.
•
To return to the previous menu, press
BACK .
•
To exit the menu, press
[TV System]
Change this setting if the video does not appear
correctly. By default, this setting matches the most
common setting for TVs in your country.
•
[PAL] - For a PAL-system TV.
•
[Multi] - For TV that is compatible with both
PAL and NTSC.
•
[NTSC] - For an NTSC-system TV.
[TV Display]
Select a display format:
16
EN
SETUP.
•
[4:3 Pan Scan] - For a 4:3 screen TV: full-height
display with the trimmed sides.
•
[4:3 Letter Box] - For a 4:3 screen TV: wide-
screen display with black bars on the top and
bottom of the screen.
•
[16:9] - For a wide-screen TV: display ratio 16:9.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
•
[On] - Turn on progressive scan.
•
[Off] - Turn off progressive scan mode.
Note
•
For more detailed description, see "Get started" >
"Turn on progressive scan".
[Picture Setting]
Select a predefi ned set of picture color settings or
customize the personal setting.
•
[Standard] - Original color setting.
•
[Bright] - Vibrant color setting.
•
[Soft] - Warm color setting.
•
[Personal] - Customize the color setting. Set
the level of brightness, contrast, tint and color
saturation, then press OK.
[My Wallpaper]
Select a picture as the wallpaper.
•
[Default picture] - The default wallpaper
preset as the Philips logo.
•
[Saved picture] - A captured video image or
JPEG photo.
•
[Current picture] - Capture a video image or
JPEG photo and save it on the product.
1. Play a video or photo slideshow.
2. Select a video image or photo: press
pause, and then press SETUP.
3. Navigate to the option ( [Video Setup] >
[My Wallpaper] > [Current picture]).
4. Press OK to confi rm.
»
One video image or JPEG photo is saved as
wallpaper.
»
A newly saved image or photo replaces the
earlier one.
[HD JPEG]
Enjoy untouched and uncompressed JPEG pictures
at its original resolution when you connect this
product and the TV with an HDMI cable.
•
[On] - Display high defi nition picture.
•
[Off] - Display standard picture.
to
Advertisement
Table of Contents
