Product Introduction; Indoor Units; Operation Indication Lamps; Outdoor Unit - LG HSN09IV Owner's Manual

Product Introduction

Here is a brief introduction of the indoor and outdoor units.

Indoor Units

Operation lamp

Operation Indication Lamps

On/Off
Sleep mode
Energy-Saving
Cooling Mode
Plasma + Ion
Plasma
Timer
Defrost mode

Outdoor unit

OUT
operation
DOOR
Power Display : Indicates the setting temperature and operation mode.
Auto Clean
Auto Clean
Cooling, heating,
Operation
Dehumidification
mode
Mode
Shape of Setting
display temperature
* Hot start operation: Stops the indoor fan in heating operation for minutes to prevent cold air from blowing out
from unit.
* In defrost mode unit stops heating operation for few minutes to remove formation of ice on the heat
exchanger coils to maintain the efficiency.
Outdoor Unit
Air intake vents
Front grille
Triple filter
Air outlet
Vertical louver
: Lights up during the system operation, error code and auto restart setting.
: Lights up during sleep mode auto operation.(non-Inverter Model)
: Lights up during Energy-Saving Cooling Mode Operation.
: The function illustrates its dynamic mode by using a multiple lighting system.
: Lights up during timer operation.(non-Inverter Model)
Lights up during timer operation or sleep mode auto operation (Inverter Model only)
: Lights up during defrost mode or *hot start operation (Heat pump model only)
: Lights up during outdoor unit operation. (Cooling model only)
: Lights up during auto clean mode operating and turn off unit set.
Auto operation mode
Standard Too hot Hot
Air outlet vents
Base plate
Air inlet
Plasma filter
Air filter
LED Display
Horizontal vane Horizontal vane Horizontal vane
Allergy free filter
Comfortable Cold Too cold
Product Introduction
ON/OFF button
Signal Receiver
Jet Energy-saving Test
cooling mode
Cool/Heat operation
Connecting
wires
Refrigerant pipes
Drain hose
Owner's Manual 7
Auto
clean