LED does not turn to red in Standby mode
LED turns to orange in Standby mode in the following conditions:
●
– Recording is in progress.
–
Timer Programming
–
Home Network Server
–
Powered On by Apps
–
Home Streaming
–
Powered On by Easy Mirroring
–
VOD Content Refresh
–
TV Anywhere
LED turns to orange during adjustment of the panel (approx. 10 minutes to
●
maximum 80 minutes). LED turns to orange again in standby mode when
the TV is turned on / off before the panel adjustment is completed. (Be
sure to turn the TV off with the remote control to adjust the panel.)
The panel maintenance notification is displayed when turning the TV off with
Standby On / Off switch of the TV's remote control.
Perform the panel maintenance. Select
●
to start the panel maintenance.
– The panel maintenance is interrupted when selecting
maintenance this time
displayed.
When pushed with a finger, the display panel moves slightly and makes a
noise
There is a little gap around the panel to prevent damage to the panel. This
●
is not a malfunction.
is set.
is set to On.
is set to On.
is set to Always.
is set to On.
is set to
On
is set to On.
or turning the TV off while the notification is
- 352 -
and VOD content is updated.
Turn the TV off now
Don't start panel
and press
OK