Table of Contents
Advertisement
Setting the handset
Handset update
The handset supports firmware updating via the DECT radio link to the base/router
(SUOTA = Software Update Over The Air).
The base/router to which the handset is registered must also support this function
(
www.gigaset.com/compatibility)
If your base/router does not support this function, you can also update the firmware
via a USB cable and Gigaset Quick Sync.
If new firmware is available for the handset a message to this effect will be displayed.
¤
Start the firmware update with Yes.
Start the firmware update manually:
¤
. . . use
Update
OK
The update process may take up to 30 minutes. During this time, only restricted
handset use is available.
Resetting the handset to the default settings
Reset any individual settings and changes that you have made.
¤
. . . use
Reset
OK
Yes . . . the handset's settings are reset
The following settings are not affected by a reset
•
Registration of the handset to the base station
•
Date and time
•
Directory entries and call lists
46
to select
Settings
Update
OK
OK . . . if there is new firmware, the update will start
to select
Settings
Availability and operation of the functions
may differ on your telephone.
OK
System
OK
System
OK
Handset
OK
Handset
Advertisement
Table of Contents
