Sharing Custom Picture Controls - Nikon 1541 User Manual

Sharing Custom Picture Controls

Custom Picture Controls created using the Picture Control Utility
available with ViewNX 2 or optional software such as Capture NX 2
can be copied to a memory card and loaded into the camera, or
custom Picture Controls created with the camera can be copied to
the memory card to be used in other D4S cameras and compatible
software and then deleted when no longer needed (if two
memory cards are inserted, the card in the primary slot will be
used; 0 96).
To copy custom Picture Controls to
or from the memory card, or to
delete custom Picture Controls from
the memory card, highlight Load/
Save in the Manage Picture
Control menu and press 2. The
following options will be displayed:
• Copy to camera: Copy custom Picture Controls from the memory
card to custom Picture Controls C-1 through C-9 on the camera
and name them as desired.
• Delete from card: Delete
selected custom Picture
Controls from the memory
card. The confirmation
dialog shown at right will be
J
displayed before a Picture
Control is deleted; to delete
the selected Picture Control, highlight Yes and press J.
• Copy to card: Copy a custom Picture Control (C-1 through C-9) from
the camera to a selected destination (1 through 99) on the
memory card.
186
J button