LG LP86 Series Owner's Manual page 12

12
ASSEMBLING AND PREPARING
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the
stand.
(Only LN54**, LP36**, LP63**)
(Only 42/47LP86**)

M4 x 8, 2EA
WARNING
To prevent TV from falling over, the TV
y y
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
Adjusting the angle of the TV to suit view
(Only 32LN54 ** , 32LP36 ** , 32LP63 **
Swivel 15 degrees to the left or right and adjust the
angle of the TV to suit your view.
(Only 37/39/42/47LN54 ** , 37/39/42LP36 ** ,
37/39/42LP63 ** )
Swivel 90 degrees to the left or right and adjust the
angle of the TV to suit your view.
M4 x 20,
2EA
y
15˚
90˚
CAUTION
When adjusting the angle of the product,
y
watch out for your fingers.
» Personal injury may occur if hands or
fingers are pinched. If the product is tilted
too much, it may fall, causing damage or
injury.
, 42/47/55LP86 ** )
15˚
90˚