Connecting Example: Av Equipment - Panasonic PT-RZ660 Operating Instructions Manual

<DVI-D IN> terminal pin assignments and signal names
Outside view
(24) (17)
(16)
(8) (1)

Connecting example: AV equipment

For <HDMI IN>/<DVI-D IN>/<RGB 1 IN> terminals
VCR (with built-in TBC)
VCR (with built-in TBC)
Attention
f Be sure to use one of the following when connecting a VCR.
g Use a VCR with built-in time base corrector (TBC).
g Use a time base corrector (TBC) between the projector and the VCR.
f The image may be disrupted when nonstandard burst signal is connected. In such a case, connect the time base corrector (TBC) between
the projector and the external devices.
Note
f It may be necessary to switch the setting in the [DISPLAY OPTION] menu → [DVI-D IN] → [EDID SELECT] depending on the connected
external device when inputting DVI-D.
f The <DVI-D IN> terminal can be connected with the HDMI and DVI-D compatible devices. However, some external devices may not be able
to project images properly, such as the image not displaying.
f For the HDMI cable, use an HDMI High Speed cable that conforms to the HDMI standards. If a cable that does not conform to the HDMI
standards is used, images may be interrupted or may not be projected.
f The <HDMI IN> terminal of the projector can be connected to an external device equipped with a DVI-D terminal using an HDMI/DVI
conversion cable. However, this may not function properly for some external devices, and images may not be displayed.
f The projector does not support VIERA Link (HDMI).
f It is necessary to switch the setting in the [DISPLAY OPTION] menu → [RGB IN] → [RGB1 INPUT SETTING] when inputting a video signal
and the Y/C signal.
52 - ENGLISH
Chapter 2 Getting Started — Connecting
Pin No.
(1)
(2)
(3) T.M.D.S data 2/4 shield
(4)
(5)
(6)
(9)
(7)
(8)
(9)
(10)
(11)
T.M.D.S data 1/3 shield
(12)
DVD player with HDMI terminal (HDCP)
Signal name Pin No.
T.M.D.S data 2-
T.M.D.S data 2+
―
―
DDC clock
DDC data
―
T.M.D.S data 1-
T.M.D.S data 1+
―
Signal name
(13) ―
(14) +5 V
(15) GND
(16) Hot plug detection
(17)
T.M.D.S data 0-
(18) T.M.D.S data 0+
(19) T.M.D.S data 0/5 shield
(20) ―
(21) ―
(22) T.M.D.S clock shield
(23)
T.M.D.S clock+
(24) T.M.D.S clock-
Blu-ray disc player