Table of Contents
Advertisement
Set the network connection to use Internet services such as perform software upgrades.
Automatic Open Network Settings (Wired)
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1
Set
Network Type
to
Wired
from the
2
The network test screen appears and verifies the network connection.
When the connection has been verified, the
Internet. If you have any problems using online services, please contact your Internet
service
provider." message appears.
" If the connection process fails, check the LAN port connection.
" If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section(Manual Open Network Settings (Wired)).
Manual Open Network Settings (Wired)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and
DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
Open Network Settings
page.
"Success! Your device is connected to the
How to set up manually
1
Set
Network Type
to
Wired
from the
2
The network test screen appears and the verification process starts. Press Cancel. The
verification process stops.
3
Select
IP Settings
on network connection screen. The
4
Select the field at the top and then set
process for each field in the
IP
Address.
" Setting
IP setting
to
Enter manually
manually.
5
When done, select
OK
at the bottom of the page. The network test screen appears and the
verification process starts.
6
When the connection has been verified, the
Internet. If you have any problems using online services, please contact your Internet
service
provider." message appears.
Open Network Settings
page.
IP Settings
screen appears.
IP setting
to
Enter manually
Repeat the entry
automatically changes
DNS setting
"Success! Your device is connected to the
to
Enter
19
Advertisement
Table of Contents
