Displaying The Picture - Hitachi CP-X4020E User Manual

Displaying the picture

1. Activate your signal source. Turn the signal
source on, and make it send the signal to
the projector.
2. Use the VOLUME + / VOLUME - buttons
to adjust the volume.
To have the projector silent, press the MUTE
button on the remote control.
3. Press the INPUT button on the projector.
Each time you press the button, the
projector switches its input port in turn.
You can also use the remote control to
select an input signal. Press the VIDEO
button for selecting an input signal from the
COMPONENT (Y, Cb/Pb, Cr/
or VIDEO port, or the COMPUTER button
for selecting an input signal from the
COMPUTER IN1 or the COMPUTER IN2
port.
Press the ASPECT button on the remote
4.
control. Each time you press the button,
the projector switches the mode for aspect
ratio in turn.
5.
6. Use the zoom ring to adjust the screen
size.
7. Use the focus ring to focus the picture.
CAUTION
while the projector's lamp is on, use one of methods
below.
- Use the supplied lens cover.
-
Taking any other action may cause the damage on
the projector.
NOTE The ASPECT button does not work when no proper signal is inputted.
in the CD.
ON
OFF
INPUT button
, S-VIDEO
ON
OFF
Zoom ring
10
MY SOURCE/
COMPUTER
VIDEO DOC.CAMERA
ASPECT AUTO SEARCH BLANK
FREEZE PAGE VOLUME
MAGNIFY
VOLUME+ button
UP
DOWN
VOLUME- button
KEYSTONE MY BUTTON MUTE
MUTE button
1 2
MENU
POSITION
ENTER
ESC RESET
NDBY/ON
VIDEO button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
COMPUTER button
ASPECT AUTO SEARCH BLANK
PAGE VOLUME
MAGNIFY FREEZE
UP
ASPECT button
DOWN
KEYSTONE MY BUTTON MUTE
1 2
MENU
POSITION
ENTER
ESC RESET
Zoom / focus ring cover
INPUT MEN