5 Listen to radio
Tune to radio stations
Note
•
To improve FM reception, fully extend and adjust the
position of the FM antenna attached to the back panel.
1
Press FM to select the FM tuner source.
2
Press and hold
» The unit tunes to a station with strong
reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
•
Press
(FM) repeatedly until you find
optimal reception.
Store radio stations
Note
•
You can store a maximum of 20 FM radio stations.
1
Tune to a radio station.
2
Press PROG to activate programming.
3
Press
(PRESET +/-) to allocate a
number from 1 to 20 to this radio station,
then press PROG to confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat the previous steps to program
other stations.
14
EN
(FM) for three seconds.
Note
•
You can also use the numeric keypad directly to
allocate a preset number. To allocate a 2-digit number,
press the number corresponding to the first digit, and
then press the number corresponding to the second
digit within 2 seconds.
•
To overwrite a programmed station, store another
station in its place.
You can also store radio stations automatically.
In FM tuner mode, press and hold PROG
•
to start automatic programming.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programed radio station is
broadcast automatically.
Select a preset radio station
•
In tuner mode, press
repeatedly to select a preset radio station.
Tip
•
You can also use the numeric keypad directly to select
a preset number. To select a 2-digit number, press the
number corresponding to the first digit, and then press
the number corresponding to the second digit within
2 seconds.
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press FM to switch
•
between mono and stereo broadcast.
(PRESET +/-)