Panasonic PT-JW130HBU Operating Instructions Manual page 83

[OFF]
[ON]
Note
f If you use "Multi Projector Monitoring & Control Software" and "Wireless Manager ME6.2" at the same time on the same computer,
simultaneous image distribution function of "Multi Projector Monitoring & Control Software" may not work properly. To use them at the same
time, use each of the software on separate computers.
Setting [MULTI-LIVE]
Switch the display to multi-live mode when images are to be transferred from multiple computers to the projector using "Wireless Manager
ME6.2".
Refer to the Operating Instructions of "Wireless Manager ME6.2" for details. Multi-live mode can be used with Panasonic's image transfer
application software that supports iPad/iPhone/iPod touch, and Android terminals. Refer to the following URL for image transfer application
software that supports iPad/iPhone/iPod touch, and Android terminals.
http://panasonic.net/avc/projector/
1) Press as to select [Panasonic APPLICATION].
2) Press the <ENTER> button.
f The [Panasonic APPLICATION] screen is displayed.
3) Press as to select [MULTI-LIVE], and press the <ENTER> button.
f The projector is switched to multi-live mode.
f The items will switch each time you select [MULTI-LIVE].
f The style switches to 4-screen multi, 4-screen index, and 16-screen index in order.
Setting [PASSWORD]
By setting the projector to require password entry when a device is connected, you can prevent image cut-in due to wrong external
connections.
1) Press as to select [Panasonic APPLICATION].
2) Press the <ENTER> button.
f The [Panasonic APPLICATION] screen is displayed.
3) Press as to select [PASSWORD].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f When you connect a device to the projector using "Wireless Manager ME6.2", setting [ON] to require password entry is recommended.
f When you use functions of "Multi Projector Monitoring & Control Software" for simultaneous image distribution or deleting distributed
images, images cannot be distributed to the projector on which [PASSWORD] is set to [ON]. To use those image distribution functions, set it
to [OFF].
Performing [PASSWORD CHANGE]
Set or change the password to connect to the projector.
1) Press as to select [Panasonic APPLICATION].
2) Press the <ENTER> button.
f The [Panasonic APPLICATION] screen is displayed.
3) Press as to select [PASSWORD CHANGE].
4) Press the <ENTER> button.
f The [PASSWORD CHANGE] screen is displayed.
5) Press asqw to select a character, and press the <ENTER> button to enter.
Chapter 4 Settings — [NETWORK] menu
Set this item to prohibit live mode cut-in by "Wireless Manager ME6.2" or image distribution by "Multi
Projector Monitoring & Control Software".
Set this item to allow live mode cut-in by "Wireless Manager ME6.2" or image distribution by "Multi
Projector Monitoring & Control Software".
Disables password entry.
Enables password entry.
ENGLISH - 83