Gigabyte G291-280 User Manual page 111

RAID Mode: When set to RAID, the SATA controller enables both its RAID and AHCI functions. You will
be allows access the RAID setup utility at boot time.
Options available: AHCI/RAID. Default setting is AHCI.
Alternate Device ID on RAID
Enable/Disable Alternate Device ID on RAID mode.
Options available: Enable/Disable. Default setting is Disabled
Please note that this option appears when HDD is in RAID Mode.
sSATA Port 0/1/2/3/4/5
The category identifies sSATA hard drives that are installed in the computer.
System will automatically detect HDD type.
Port 0/1/2/3/4/5
Enable/Disable Port 0/1/2/3/4/5 device.
Options available: Enable/Disable. Default setting is Enable.
Hot Plug (for Port 0/1/2/3/4/5)
Enable/Disable HDD Hot-Plug function.
Options available: Enable/Disable. Default setting is Disable.
Spin Up Device (for Port 0/1/2/3/4/5)
On an edge detect from 0 to 1, the PCH starts a COM reset initialization to the device.
Options available: Enable/Disable. Default setting is Disabled
(Note 1) Only appears when HDD sets to RAID Mode.
(Note 2) Only supported when HDD is in AHCI or RAID Mode.
(Note 1)
(Note 2)
(Note 2)
- 109 - BIOS Setup