Table of Contents
Advertisement
Uploading a schedule
Upload a backed up schedule from the client computer (only Windows computer/Mac are supported) to the projector.
r [Data management] page
1
Upload file [Add] button
Adds upload target data.
Click this to display the file selection screen.
2
Upload data deletion icon
Click this to enter the deletion mode. Select data you want to
cancel upload, and delete it.
3
Upload data
Displays upload target data in a list.
4
[Upload] - [Includes setting information]
If this check box is selected, the system setting information
included in upload data is also uploaded.
r Procedure
1)
Click the [Data management] tab.
f The [Data management] page is displayed.
2)
Click the upload file [Add] button.
f The file selection screen is displayed.
3)
Select a backup file to upload, and click the [Open] button.
f The file name is displayed in the upload data list.
f Go back to Step 2) to continue to add another backup file, or go to Step 4) to cancel upload of a file, and then when you finish adding
all backup files necessary to upload, proceed to Step 6).
4)
If there is a file you want to cancel upload, click
f The mode changes to deletion mode.
5)
Select a file you want to cancel upload, click [Delete].
f You can select multiple files.
Chapter 5 Operations — Content Manager
5
Upload data addition progress
Displays the progress by comparing the number of saved data
items when backup was obtained with the number of added
upload target data items.
6
[Upload] button
Writes upload target data in the SD card of the projector.
7
[Undo] button
Clears upload target data.
.
1
2
3
4
5
6
7
ENGLISH - 179
Advertisement
Table of Contents
