Power/Warning Indicators; When An Indicator Lights Up - Panasonic PT-TW341 Operating Instructions Manual

Power/Warning Indicators

When an indicator lights up

If a problem should occur inside the projector, the power indicator <ON(G)/STANDBY(R)> and the warning indicator
<WARNING> will inform you by lighting or blinking. Check the status of the indicators and remedy the indicated problems as
follows.
Attention
f Before you take a remedial measure, follow the procedure of switching the power off indicated in "Powering Off the
Projector" (x page 35).
Power indicator <ON(G)/STANDBY(R)>
Warning indicator <WARNING>
Power indicator
<ON(G)/STANDBY(R)>
Off
Lighting
Lighting
Red
Lighting
Blinking
Chapter 5 Maintenance - Power/Warning Indicators
Warning
indicator Status
<WARNING>
The power cord is
Off
unplugged.
The power cord is
plugged.
Off
The projector is in
standby mode after the
cooling is completed.
The replacement time of
Lighting in red the lamp unit is displayed.
(Standby mode)
It has exceed the replace-
ment time of the lamp unit
Blinking in red
and the projector is turned
off automatically.
The projector inside is
cooling down and after
a while, the projector is
Off
turned off. (The projector
will enter the standby
mode)
Cause
--
--
--
f The indicator lights
up when the usage
time of the lamp unit
reaches 6 000 hours
(when [Lamp control]
is set to
[ (Eco 1)]).
f Replace the lamp unit.
f The indicator blinks
when the usage
time of the lamp unit
reaches 6 600 hours
(when [Lamp control]
is set to
[ (Eco 1)]).
--
Solution
--
--
--
--
ENGLISH - 83