Installation and Assembly - Security Projector Mount
™
for Gateway
210 Projector
This product is intended for use with UL
Listed products and must be installed
by a qualified professional installer.
R
Read instruction sheet before you start installation and assembly.
Installer must verify that the ceiling will safely support
WARNING
the combined weight of projector mount and projector.
IMPORTANT! Be sure not to touch the projector while tightening the set screw on the
ball and socket mount. This may cause the image to be unaligned when you let go.
IMPORTANT! Turn to the appropriate page for your application and ceiling condition.
Three Different Applications:
Flush Mount ..................................................................................................................................... step 3, page 5
Threaded Rod .................................................................................................................................. step 4, page 5
Extension Column ........................................................................................................................................ page 6
Installation Conditions:
To Wood Joist Finished Ceilings,
Exposed Wood Joists, or Wood Beam Ceilings ........................................................................................ page 3
To Concrete Ceilings .................................................................................................................................... page 4
Visit the Peerless Web Site at www.peerlessindustries.com
Maximum Load Capacity: 20 lb (9.1 kg)
1 of 8
For customer service call 1-800-729-0307 or 708-865-8870.
Model: PJ-G210
Reference Gateway 8007000
ISSUED: 04-21-03 SHEET #: 055-9158-1