Table of Contents
Advertisement
Chapter 5. Menu
System ▼
2nd
3rd
Auto Source Switching
Primary Source Recovery
Primary Source
Secondary Source
DVI Connection
Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Network Standby
Description
When the
Auto Source Switching
is On, the display video source will automatically be searched for active video.
The
Primary Source
selection will be activated, if the current video source is not recognized.
The
Secondary Source
selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an
active source, each search checking the primary and then secondary source. If both searches fail, the display will
return to the first video source and display a message indicating that there is no signal.
When the
Primary Source
selection is set to All, the display will search all the video source inputs twice in sequence
looking for an active video source, returning back to the first video source in the sequence if no video is found.
Select whether to restore the selected primary input source when a primary input source is connected.
• The
Primary Source Recovery
function is disabled if
Specify
Primary Source
for the automatic input source.
Specify
Secondary Source
for the automatic input source.
Select the source device that is connected to the DVI input.
• Restart the source device if the screen is not displayed.
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
The PC module can be turned on/off separately from the LFD.
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
• Available only DVI, HDMI,
DisplayPort
You can set the screen standby mode to be applied when an input signal is received.
• Available only DVI, HDMI,
DisplayPort
• Ensure that the source device is connected correctly when the
• If
No Signal Message
is set to Off, the
Message
to On.
This feature keeps the network power on when the product turns off.
Primary Source
is set to All.
mode.
mode.
Signal is weak or no signal
Signal is weak or no signal
message does not appear. Set
67
message appears.
No Signal
Advertisement
Table of Contents
