Speaker Connection; Attaching The Speakers To The Player; Attaching The Rear Speakers To The Wireless Receiver - LG SH86SH-S Simple Manual

Speaker Connection

Attaching the speakers to the
player
Connect the wires hooked up to the speaker to the
unit.
- To connect the cable to the unit, press each
plastic finger pad to open the connection
terminals on the unit. Insert the wire and
release the finger pad.
- Connect the black stripe of each wire to the
terminals marked - (minus) and the other end
to the terminals marked + (plus).
Colour Speaker
Green Center
Orange Sub
woofer
Red Front
White Front
HB806SHW-D0_BAUTLL_SIM_ENG_4994.indd 11
Position
Centre
Any front position
Front right
Front left
Attaching the rear speakers to
the wireless receiver
Connect the rear speakers to the wireless receiver
with the speaker cables.
Make sure the wire marked black goes in to the
terminal marked "–" (minus) and the other wire
goes in to the terminal marked "+" (plus).
(+)
About Ferrite Core (for EMI only)
Be sure to attach the ferrite core to the speaker
cable. This ferrite core can reduce noises.
How to attach the ferrite core
1. Press the stopper [a] of the ferrite core to open.
2. Wind the speaker cables once on the ferrite
core.
3. Close the ferrite core until it clicks.
Refer to the fig.3 and comment.
Rear of wireless
receiver
Connecting 11
2
(-)
The length
here is as
short as
possible.
2011-05-23 9:30:33