Table of Contents
Advertisement
Unpacking &
Installing
Unpack your oven and place it on a flat level surface.
METAL TRAY
By following the basic steps on these two pages you will be able to quickly check that your oven is operating
correctly. Please pay particular attention to the guidance on where to install your oven. When unpacking your
oven make sure you remove all accessories and packing. Check to make sure that your oven has not been
damaged during delivery. Do not use the oven if it is damaged.
RACK
WATER TRAY
WATER VESSEL
Place the oven on a level bench top surface of your
choice with more than 85cm height but make sure there
is at least 20cm of space on the top and 10cm at the rear for proper
ventilation. The front of the oven should be at least min. 8cm/max.
22cm from the edge of the surface to prevent tipping.
An exhaust outlet is located on the underside of the oven and can
emit very hot air temperatures. If the bench top is made of timber or
has a veneered finish, a shield must be placed between the oven
and the bench top to avoid it from being damaged or discoloured.
Blocking the outlet can damage the oven.
* THIS OVEN SHOULD NOT BE USED FOR COMMERCIAL CATERING
PURPOSES.
* THIS OVEN CAN NOT BE USED AS BUILT-IN TYPE.
* THIS OVEN IS INTENDED FOR DOMESTIC INDOOR HOME USE.
IT SHOULD NOT BE USED FOR MOBILE APPLICATIONS.
18
Advertisement
Table of Contents
