Table of Contents
Advertisement
Care and maintenance
Care and maintenance
Warning
Always switch off the electricity supply before
performing maintenance work. In the event of a fault,
contact customer services.
Caution
• Use soapy water and a cloth for cleaning. Never use abrasive
powders.
• Avoid banging pots and pans down on the hob.
• Do not leave any empty pan on the heating zone.
•
The appliance should be cleaned after use.
•
Wipe the inner and outer surface of the appliance and its accessories with
wet cloth.
•
Any liquid overflowing from the pan must always be removed with a cloth.
•
The surface of the hob may be easily cleaned as follows:
Cleaning of enamel parts:
To maintain the features of the enamel parts, wash frequently with soapy water.
Never use abrasive powders. Avoid leaving acid or alkaline substances
(vinegar, lemon juice, salt, tomato juice, etc) on the enamel parts and washing
the enamel parts while they are still warm.
Cleaning of stainless steel parts:
Wash these parts with soapy water and then dry them with a soft cloth.
The shine is maintained by regularly cleaning them with special products normally
commercially available. Never use abrasive powders.
Cleaning of burner flame dividers
Given that they are not fixed, the flame dividers can be cleaned by simply
removing them and washing them with soapy water. After drying them well and
checking that the holes are not blocked, put them back into their correct position.
Replacement of parts
FUSE
OFF
12
Warning
Always switch off the electricity supply before
performing maintenance work. In the event of a fault,
contact customer services.
FUSE
OFF
Advertisement
Table of Contents
