Table of Contents
Advertisement
Network Setting (Wireless)
― Models that do not support wireless communication: LH55OHFPVBC, LH46OHFPVBC
Connecting to a Wireless Network
Wireless IP sharer
(router having DHCP server)
The LAN Port on the Wall
LAN Cable
Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video
may not play smoothly.
― Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless
IP sharer is currently being used by another device nearby, this will result in interference and communication
failure.
― Your product supports only the following wireless network security protocols.
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP, TKIP
or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung products will not support a connection in
compliance with new Wi-Fi certification specifications.
― If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push
Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and
WPA key in either mode.
― Connection Methods: You can setup the wireless network connection in three ways.
Auto Setup (Using the Auto Network Search function), Manual Setup,
WPS(PBC)
Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices that access the network
to transmit an encrypted security code called an Access or
a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked
to enter when you set up security for your wireless network. If you use this method of setting up the
network connection, and have a
Security key
Phrase during the the automatic or manual setup process.
How to set up automatically
1
Set
Network type
to
Wireless
from the
Open Network Settings
2
The
Network
function searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, press the ▲ or ▼ button to select a network, and then press the E button
twice.
― If the desired wireless router does not appear, select
― If the router cannot be found after retrying, select the
The
Add Network
button appears.
4
If the
Enter password.
screen appears, go to step 5. If you select a wireless router that does not have
security, go to step 7.
5
If the router has security, enter the
Enter password.
6
When done, use the right arrow button to move the cursor to Done, and then press E. The network
connection screen appears and the verification process starts.
― A connection with the router is established, but the Internet cannot be accessed.
7
When the connection has been verified, the
setup and ready to
use." message appears.
Security
key. The
Security key
for your wireless network, you will have to enter the Pass
page.
Refresh
to search again.
Stop
button.
(Security key or PIN).
"Your wireless network and Internet connection are
is based on
85
Advertisement
Table of Contents
