Attaching The Floor Stand - Sony BRAVIA XBR-100Z9D Reference Manual

Attaching the Floor Stand

Your TV is shipped with Table-Top Stand
attached to the TV.
Recommended
Refer to the instructions below on how to
change the Table-Top Stand to Floor Stand.
Note
• Do not put stress on the LCD panel or the frame
around the screen.
• Be careful to not pinch your hands or the AC
power cord when you install the TV set to the
Floor Stand.
• Six or more people are needed to carry out this
installation.
• Press HOME, then select
[Sound]  [TV Position]  [Table-Top
Stand] when you use the Floor Stand.
10
US
[Settings]. Select
1
Remove screws from Table-Top
Stand.
Note
• When reassemble the Table-Top Stand,
make sure it matches the screw holes.
2
Lift up the TV.