Table of Contents
Advertisement
Multistage Cooking
Your microwave oven can be programmed to cook food in up to four
stages (the Convection , Microwave+Convection and Preheat mode can
not be used in Multistage cooking). Example: You wish to defrost food and
cook it without having to reset the oven after each stage. You can thus
defrost and cook a 1.8 kg chicken in four stages:
•
Defrosting
•
Microwave cooking for 30 minutes
•
Grill for 15 minutes
☛
Defrosting and standing must be the first two stages. Combination and
Grill can only be used once during the remaining two stages, However
microwave can be used twice(at two different power levels).
1. Turn the Control knob to the Power Defrost (
symbol.
2. Select the type of food that you are cooking by pressing the
Select (
3. Set the weight by turning the encoder dial the appropriate
number of times (1800 g in the example).
4. Turn the Control knob to the Microwave (
5. Set the microwave power level by pressing the Select (
button to select the appropriate Power Level (450W in the
example)
6. Set the cooking time by turning the encoder dial (30 minutes
in the example).
7. Turn the Control knob to the Grill (
8. Set the cooking time by turning the encoder dial the
appropriate number of times (15 minutes in the example).
9. Press Start(
Result:
Cooking starts:
◆ When cooking has finished, the oven will beep
) button.
) symbol.
) symbol.
) button.
and flash "0" four times. The oven will then
beep one time per minute.
Fast Preheating the Oven
For convection cooking, it is recommended that you preheat the oven to
the appropriate temperature before placing the food in the oven.
When the oven reaches the requested temperature, it is maintained for
approximately 10 minutes; it is then switched off automatically.
Check that the heating element is in the correct position for the type of
cooking that you require.
1. Press the Auto Fast Preheat(
)
2. Press the Auto Fast Preheat(
3. Press the Start(
✉
In case the inner temperature has reached the preset
temperature, the beep 6 times when setting the temperature and
the preset temperature is kept for 10 minutes.
)
✉
If you would like to know the current temperature of oven cavity,
press
Auto Fast Preheat
19
Result:
The following indications are displayed:
250°C (temperature)
) button one or more
times to set the temperature.
) button.
Result:
The oven is preheated to the requested
temperature.
◆ Upon arrival at the preset temperature, the
oven beeps 6 times and the temperature is
kept for 10 minutes.
◆ After 10 minutes, the beeps 4 times and the
operation stops.
(
) button.
GB
) button.
Advertisement
Table of Contents
