Panasonic CF-VDM302AU Operating Instructions Manual page 18

Using the Software
Installing Easy Media Creator
To install the software application, follow the procedure below.
CAUTION
1 GB of free space on the hard disk is needed to install all the components of "Easy
Media Creator."
Close all other software application before running the Setup program for "Easy
Media Creator."
Log on to Windows as an administrator.
NOTE
E
Depending on the computer, preparatory steps may be necessary before installa-
tion. Before installing the application, be sure to read the Operating Instructions or
Reference Manual of the computer.
1 Log on to Windows as an administrator.
2 Set "DVD Drive Utility Disc" in the drive.
3
Windows 7
At the [AutoPlay] message, click [Run SETUPUTIL.EXE]. [Utility Setup tool] screen
will appear (allow some time for disc recognition). When the setup program will not
run automatically, click
and files], and press Enter .
Windows Vista
At the [AutoPlay] message, click [Run SETUPUTIL.EXE] - [Continue]. [Utility
Setup tool] screen will appear (allow some time for disc recognition). When the setup
program will not run automatically, click
[Start Search], and press Enter , and then click [Continue].
Windows XP
At the confirmation message, click [OK].
[Utility Setup tool] screen will appear (allow some time for disc recognition).
When the setup program will not run automatically, input [x:\setuputil.exe]*
- [Run] and click [OK].
3
* "x" is the drive letter. You can change the letter to suit your preference.
4 Click [Easy Media Creator Setup].
5
Windows 7
Click [Next] at the welcome message.
Windows XP
Select your language at [Choose Setup Language], then click [OK].
Follow the on-screen instructions.
18
(Start) and input [x:\setuputil.exe]*
Windows Vista
3
in [Search programs
(Start) and input [x:\setuputil.exe]*
3
in
3
in [start]