Table of Contents
Advertisement
Connections and Preparations
Checking the Supplied
Accessories
Check the carton to make sure it contains the following
items:
• Remote control RM-PJ29 (1)
• Size AA (R6) manganese batteries (2)
• AC power cord (1)
• Safety Regulations (5)
• Operating Instructions (CD-ROM) (1)
Inserting the Batteries
into the Remote Control
Caution about handling the remote control
• Handle the remote control with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote control in a location near a heat
source, a place subject to direct sunlight, or a damp
room.
While pressing
the lid, slide it.
Insert the batteries E
side first.
Installing the Unit
The installation distance between the unit and a screen
varies depending on the size of the screen or whether or not
you use the lens shift features. Install this unit so that it fits
the size of your screen. For details on the distance between
the unit and the screen (the projection distance) and the
size of projected video, see "Projection Distance and Lens
Shift Range" (page 46).
1
Position the unit so that the lens is parallel to the
screen.
Top view
2
Project an image on the screen and adjust the picture
so that it fits the screen (page 7).
Note
When using a screen with an uneven surface, stripes pattern may
rarely appear on the screen depending on the distance between the
screen and the unit or the zooming magnifications. This is not a
malfunction of the unit.
6
Screen
Advertisement
Table of Contents
