Table of Contents
Advertisement
Take the following precautions when removing jammed paper from the product:
• Remove the jammed paper carefully. Using too much force may damage the product.
• Unless specifically instructed, avoid tilting the product, placing it on its side, or turning it upside down,
as ink may spill.
Warning: Never touch the buttons on the control panel while your hand is inside the product. If the
product starts operating, it may cause an injury. Do not touch any protruding parts inside the product.
Parent topic:
Related references
Paper Feeding Problems
Paper Ejection Problems
Related topics
Loading Paper
Paper Ejection Problems
If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.
Select the correct paper size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting when you reprint.
Parent topic:
Related references
Paper or Media Type Settings - Printing Software
Paper Type Settings - Control Panel
Paper Feeding Problems
Paper Jams Inside the Product
Related tasks
Selecting the Paper Settings - Control Panel
Related topics
Loading Paper
Solving Paper Problems
Solving Paper Problems
233
Advertisement
Table of Contents
