Table of Contents
Advertisement
Chapter 12
Customize Your Network Settings
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Make sure the Wi-Fi of your router is on and go to
Advanced
>
Wireless
> WPS.
12. 8. 1. Connect via the Client's PIN
Enter the PIN of your device and click Connect. Then your device will get connected to
the router.
12. 8. 2. Connect via the Router's PIN
Select
Router's PIN
in
Method 1
to enable
Router's
PIN. You can use the default PIN or
generate a new one.
Note:
PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported
devices can connect to your router with the PIN. The default PIN is printed on the label of the router.
12. 8. 3. Push the WPS Button
Click
Start
on the screen or directly press the router's WPS button. Within two minutes,
enable WPS on your personal device.
Success
will appear on the screen and the WPS
LED of the router should change from flashing to solid on, indicating successful WPS
connection.
67
Advertisement
Table of Contents
