Canon TS9150 Online Manual page 60

2-1 Diagnostic Result
2-2 Result Codes
2-3 Result Code Details
3 Wireless LAN
3-2 Infrastructure
3-2-1 Signal Strength
3-2-2 Link Quality
3-2-3 Frequency
3-2-4 MAC Address
3-2-5 Connection
3-2-6 SSID
3-2-7 Channel
3-2-8 Encryption
3-2-9 WEP Key Length
3-2-10 Authentication
3-2-11 TCP/IPv4
3-2-12 IP Address
3-2-13 Subnet Mask
3-2-14 Default Gateway
3-2-15 TCP/IPv6
3-2-16 Link Local Address
3-2-17 Link Local Prefix
Length
3-2-18 Stateless Address1
3-2-19 Stateless Prefix
Length1
3-2-20 Stateless Address2
Diagnostic result XXXXXXXX
Result codes XXXXXXXX
Result code details http://canon.com/ijnwt
Wireless LAN Enable/Disable
Infrastructure Enable/Disable
Signal strength 0 to 100 [%]
Link quality 0 to 100 [%]
Frequency XX (GHz)
MAC address XX:XX:XX:XX:XX:XX
Connection status Active/Inactive
SSID Wireless LAN SSID
Channel XX (1 to 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104,
108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153,
157, 161, or 165)
Encryption method None/WEP/TKIP/AES
WEP key length (bits) Inactive/128/64
Authentication method None/auto/open/shared/WPA-PSK/WPA2-PSK
TCP/IPv4 Enable
IP address XXX.XXX.XXX.XXX
Subnet mask XXX.XXX.XXX.XXX
Default gateway XXX.XXX.XXX.XXX
TCP/IPv6 Enable/Disable
Link local address XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Link local prefix length XXX
Stateless address 1 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless prefix length XXX
1
Stateless address 2 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
60