Adjusting Pictures (Picture Menu) - Fujitsu Plasmavision P42HHA30WS User Manual

ADJUSTING PICTURES (PICTURE MENU)

BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]
You can make changes to all picture adjustment options in the PICTURE Menu.
The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any
changes.
* On-screen information disappears if you do not take any action for about 60 seconds.
* Functions may not be available with some models and some device options.
* The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.
1
Press .
The main menu screen will appear.
2
Press or to select
"PICTURE".
Each time you press
menus appears in the following sequence:
PICTURE POSITION/SIZE
The PICTURE Menu screen will appear.
3
Press or
"Tint".
4
Press .
The "Tint" adjustment screen will appear.
Press or to change tint
5
values.
: More greenish colors
: More purplish colors
6
Press to store.
Press when you finish.
* Repeat steps 3, 4, 5 and 6 when you wish to
make changes to other options.
* When is pressed after you have selected
"Default", the settings are returned to those that
were valid when you purchased the set.
or , one of the available
AUDIO
to select
"PICTURE" selected in the main menu
screen (Video Input Mode)
FEATURES FACTORY DEFAULT
"Tint" selected in the PICTURE Menu
screen (Video Input Mode)
"Tint" adjustment screen
E-19