Installing an M.2 module
► LIFEBOOK U7510: If applicable, insert the M.2 adapter into the service compartment.
► Insert the M.2 module at a slight angle in the direction of the arrow (1)
into the slot on the mainboard.
► Fasten the M.2 module in place in the slot with the screw (2).
Removing an M.2 module
► Undo the screw (1).
The M.2 module snaps slightly upwards.
► Pull the M.2 module in the direction of the arrow (2) and out of the slot on
the mainboard and remove it from the casing.
Fujitsu
Removing and installing components during servicing
2
1
1
2
73