Quick Installation - ViewSonic VX2363S User Manual

Quick Installation

1. Connect video cable
• Make sure both the LCD display and computer are turned OFF.
• Remove rear panel covers if necessary.
• Connect the video cable from the LCD display to the computer.
Macintosh users: Models older than G3 require a Macintosh adapter. Attach the
adapter to the computer and plug the video cable into the adapter.
To order a ViewSonic
2. Connect power cord (and AC/DC adapter if required)
Power Cord
Audio Out
NOTE: HDMI (for VX2363Smhl-W/VX2363Smhl only)
DVI (for VX2363S/VX2363S-W only)
Audio In/Out (for VX2363Smhl-W/VX2363Smhl only)
3. Turn ON LCD display and computer
Turn ON the LCD display, then turn ON the computer. This sequence (LCD
display before computer) is important.
4. Windows users: Set the timing mode (example: 1024x768)
For instructions on changing the resolution and refresh rate, see the graphics
card's user guide.
5. Installation is complete. Enjoy your new ViewSonic LCD display.
Macintosh adapter, contact ViewSonic Customer Support.
®
4
HDMI
DVI
D-Sub
Audio In