ViewSonic VG3448 User Manual page 41

Manual Image Adjust
1. Press the 2/3/4/5 key to activate the Quick Menu. Then press the 4 key to display
the OSD Menu.
2. Press the 1 (ViewMode) or 2 key to select Manual Image Adjust. Then press the
3 key to enter the Manual Image Adjust menu.
3. Press the 1 (ViewMode) or 2 key to select the menu option. Then press the 3 key
to enter its sub-menu.
4. Press the 1 (ViewMode) or 2 key to adjust/select the setting. Then press the 3
key to confirm (if applicable).
Menu Nption
Auto Image Adjust Automatically adjust the screen image position.
Horizontal Size
H./V. Position
Fine Tune
Sharpness
Aspect Ratio
Overscan
Blue Light Filter
NOTE: Some options are only available for analog input signals.
VG3448
ViewMode
Input Audio Adjust
Select
Auto Image Adjust
Horizontal Size
H./V. Positian
Fine Tune
Sharpness
Aspect Ratio
Overscan
Blue Light Filter
Description
Stretch or shorten the screen on its horizontal axis.
Adjust the screen horizontally and/or vertically.
Improve distorted image quality from an analog signal.
Adjust the sharpness and picture quality of the monitor.
Select the aspect ratio of the monitor.
Enable this option to automatically enlarge the original
picture horizontally and vertically to an equal aspect ratio
that fills the screen.
Adjust the filter that blocks high-energy blue light for a
more comfortable viewing experience.
Color Adjust Manual Image
Adjust
3440 X 1440 @ 60Hz
41
Setup Menu