Table of Contents
Advertisement
5
To delete an imported image file, select [Delete Graphic]. The imported image file
cannot be deleted in [Main Menu] → [System] → [Reset All].
Memo:
● The total number of imported image files and the amount of space used can be
viewed in [Main Menu] → [Overlay Settings] → [Full Screen Graphic] → [Status]. The
amount of space that is displayed may be larger than the actual size of the files.
● The largest size that can be imported is approximately 23 MB, which also includes
the amount of space as shown in [Status] and the size of the imported SDP files.
● Images that can be displayed are as follows.
Image Size
File Size
JPEG
- Gradation: 8 bits
- Pixel format: YCbCr or grayscale
- Baseline JPEG
PNG
- Bits/Channel: 1, 2, 4, 8
- Pixel format: Grayscale, indexed, truecolor (RGB), grayscale with alpha, truecolor
- Non-interlaced PNG
● When an image that cannot be displayed is imported to the camera recorder, a
camera error message indicating that "Unsupported Graphic Format" appears when
the camera recorder attempts to display the image. Check in advance to ensure
that the image can be displayed as expected.
● When the frame rate of the recording format is 60i or 50i, the image will not be
displayed in the 12 lines at the bottommost part of the screen.
1920x1080
960x540
with alpha (RGBA)
Recording Resolution
1 MB and below
18
1280x720
640x360
Advertisement
Table of Contents
