Table of Contents
Advertisement
Troubleshooting
Check the following before calling for service.
No image appears
No image appears
Is the power cord of the
display connected?
Does power indicator
from dark to bright
mode is repeated?
Do you see an "OUT
OF RANGE" message
on the screen?
Do you see a "CHECK
SIGNAL CABLE
"message on the
screen?
• Check and see if the power cord is connected
properly to the power outlet.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard
to bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
9
Advertisement
Table of Contents
