•
"1110 Speaker assembly" on page 82
•
"1120 Built-in battery" on page 83
Removal steps of the smart-card reader assembly
Step
Screw (quantity)
3
M2 × 3 mm, flat-head, nylon-coated (2)
When installing:
Ensure that the connector of the smart-card reader is attached firmly.
1140 I/O bracket and RJ45 bracket
Note: Before you start the servicing, disable the built-in battery. See "Disabling the built-in battery"
on page 66.
For access, remove these FRUs:
•
"1010 Removable battery" on page 66
•
"1030 Base cover assembly" on page 68
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 9
Removing or replacing a FRU
85