Other Functions; Sleep Timer Setting; Dimmer; Mute - LG LH-T750TF Owner's Manual

Other Functions

Sleep Timer Setting

You can set the DVD/CD Receiver to turn off automati-
cally at a specified time.
Press SLEEP to set the desired sleep time.
1 1
The SLEEP indicator and sleep time appears in the dis-
play window.
Each time you press SLEEP the setting changes
2 2
in the following order.
SLEEP 180 → 150 → 120 → 90 →80 → 70 → 60 → 50 →
40 → 30 → 20 →10 → OFF
ote
You can check the time remaining before the
DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the
display window.

Dimmer

This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER repeatedly.

Mute

Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the display
window.

Using the Headphone Jack

Connect a stereo headphone plug ( 3.5mm) into the
PHONES connector.
The speakers are automatically disconnected when you
plug in a headphone (not supplied).

Selecting the Input Source

You can use VCRs or other units connected to the AV
IN, EURO AV connectors or Optical connector. Refer to
the owner's manual supplied with the unit for further
information on the operation.
Press AUX repeatedly on the remote control to
select the desired input source.
Each time you press this button, the mode of the func-
tion changes in the following sequence:
AV 1/2: for selecting the analog signal from AV1/2 AUDIO IN
(L/R) & VIDEO IN Connectors.
AV 1 OPT: for selecting the optical digital signal from AV1
VIDEO IN & OPTICAL IN Connector.
otes
The Optical input function is available only when the
other unit's Sampling Frequency is 32 ~ 96kHz.
You can also select the input source by pressing
FUNC. button on the front panel.
28

XTS (Excellent True Sound)

You can enjoy the vivid stereophonic sound of the
digital original source without any signal distortion.
Each time you press XTS during 2 channel mode,
the setting changes in the following order.
XTS- 1 → XTS- 2 → XTS- 3 → NORMAL ...
Tips:
XTS- 1: When playing the movie with the weak bass
sound relatively to the general music, it
enforces the sense of sound at woofer
for you to satisfy with.
XTS- 2: In the mode of 2 CH BYPASS, It creates the
high display effect by playing the sound
source via the rear speakers same as the
front speakers.
XTS- 3: You can operate both XTS- 1 and XTS- 2
simultaneously and it can complement the
relative degrading of the sound pitch of the
woofer at the XTS- 2 mode.
ote
The XTS- 2 mode is temporarily disabled when changing
from 2.1 CH to 5.1 CH and it is enabled when changing it to
2.1 CH.

XTS pro

The unique sound quality of the LG Technology creates
the optimum sound for you to play the perfect playback
of the original sound and to feel the living sound source.
Each time you press XTS pro the setting changes in
the following order.
XTS-P ON → XTS-P OFF