Table of Contents
Advertisement
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 19 to
22 (
through
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1
C-1
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
B-2
C-2
• Select "DIGITAL OUTPUT." The Setup
Display for "DOLBY DIGITAL" appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 20 to
22 (
B
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
B-2
C-2
• D-PCM (page 69)
D
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 69)
24
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
).
D
D
through
).
D
STANDARD
DOLBY SURROUND
DOLBY DIGITAL
11
12
13
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
OFF
following items as described below for the
audio connection you selected on pages 20 to
ON
22 (
D-PCM
default setting and does not need to be adjusted
D-PCM
when you first connect the player. Refer to
page 63 for using the Setup Display.
Audio Connection (pages 19 to 22)
A
• No additional settings are needed.
B-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 68)
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 20 to
22 (
through
B
B-2
C-2
• OFF (page 69)
D
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 69)
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, adjust the
"MPEG" setting (page 69).
through
B
D
C-1
OFF
STANDARD
DOLBY SURROUND
ON
D-PCM
PCM
OFF
OFF
ON
).
D
). Each of these is the
Advertisement
Table of Contents
