Table of Contents
Advertisement
These databases can be downloaded by the console by
requesting database uploads from the CEC/IMC Manager.
Since this data is broadcast to all consoles in the CEC/IMC
system, if possible, all consoles should be on-line when this
upload occurs. This avoids having to repeat the process for
other consoles at a later time.
1. From the CEC/IMC Manager's "CEC/IMC MOM
Options" main menu, select the "System
Manager Data" option. This will display the
System Manager data menu.
2. Select "Upload From System Manager".
3. From
the
"SYSTEM
STATUS" screen, select <F1> then <F8> for a full
unit upload. After the upload is complete, exit the
unit upload screen by pressing <Esc>.
4. From
the
"SYSTEM
STATUS" screen, select <F2> then <F8> for a full
group upload. After the upload is complete, exit
the group upload screen by pressing <Esc>.
5. From
the
"SYSTEM
STATUS" screen, select <F6> then <F8> for a full
site upload. After the upload is complete, exit the
site upload screen by pressing <Esc>.
6. From the "System Manager Data" menu,
select the "Upload From MOM PC" option.
7. From the "MOM PC BASED SYSTEM MANAGER
UPLOAD STATUS" screen, select <F3> then
<F8> for a full conventional channel upload. After
the upload is complete, exit the
upload screen by pressing <Esc>.
8. From the "MOM PC BASED SYSTEM MANAGER
UPLOAD STATUS" screen, select <F5> then
<F8> for a full console upload. After the upload is
complete, exit the console upload screen by
pressing <Esc>.
NOTE
System Manager database uploads must be
accomplished before sending console privilege
lists.
Console Privilege Lists
Each console must be sent its privilege list from the
CEC/IMC Manager as follows:
1. From the CEC/IMC Manager's "CEC/IMC MOM
Options" main menu, select the "Console
MANAGER
UPLOAD
MANAGER
UPLOAD
MANAGER
UPLOAD
conventional
Configuration" option. This will display the
console configuration menu.
2. From
this
menu,
Privilege List" option.
3. From the "CONSOLE
UPLOAD" screen, enter the number of the console
(1 - 32).
4. Select <F7> to send the privilege list data to the
console.
Saving Database Information
At the C3 Maestro console, the following database
information is saved automatically to the PC's hard disk
drive after the last record is received. No user action is
required:
•
User Profiles
•
Hardware Configurations
The following data is not saved automatically, but on
demand or by prompt:
•
System Manager Upload Data
•
CEC/IMC Manager Upload Data
•
Module Set-Ups
Upload data should be saved after it is transferred to
the console's PC. Modules set-ups should also be saved
after changes are made to the modules. Saving prevents
configuration problems if the PC's power is cycled or if it is
rebooted. To save upload data and module set-ups, press
<F10> on either keyboard. This will save the data to the
PC's hard disk.
SOFTWARE INSTALLATION AND
UPGRADES
As previously stated, all
software is installed on the PC's hard disk drive at the
factory. Refer to publication SRN-1000-xx which is
included with a software upgrade package if a re-
installation or an upgrade is necessary.
ENHANCED AUDIO ENCLOSURE
CONNECTOR PIN-OUTS
Tables 12 thru 28 that follow list the pin-outs of the
connectors on the Enhanced Audio Enclosure's rear panel.
"NAME" designations in the tables correspond to the
labeling used on the
I/O Backplane Board schematic
LBI-39101
select
the
" Console
PRIVILEGE
LIST
C3 Maestro application
29
Advertisement
Table of Contents
