Table of Contents
Advertisement
6. Press Esc.
7. Select the Select Color setting and choose one of the following:
• R to adjust the red color convergence
• B to adjust the blue color convergence
Note: You can adjust only the red or blue color convergence; you cannot adjust the standard green
color panel.
8. Select the Pattern Color setting and press Enter.
9. Select the pattern you want to use and press Esc.
10. Select Start Adjustments and press Enter twice.
You see this screen:
11. Use the arrow buttons on the remote control to adjust the color alignment in the corner of the screen
highlighted by the orange box.
12. Press the Enter button to move to the next corner of the screen.
13. When you are finished adjusting each corner of the screen, press Enter.
171
Advertisement
Table of Contents
